The Wall-Mount Electric Pressure Washer That Turns a Wash Bay Into a Fixed Cleaning Station
The BE Power Equipment X-1520FW1ARH is a commercial electric pressure washer built to live on the wall of a shop, wash bay, or garage and go to work the moment you squeeze the trigger. A 2.0 HP Baldor motor drives a Centurion CTE1 triplex pump for a steady 1,500 PSI at 2.0 GPM — fume-free, cold-water cleaning power that runs indoors where a gas unit never could.
It’s the industrial pressure washer for crews who clean in enclosed spaces: detail shops, food-processing rooms, kennels, and maintenance bays where exhaust is a non-starter. Plug it into a standard 120V outlet, mount it out of the way, and keep floors, equipment, and walls moving through a cleaning routine without wheeling a machine in and out.
Key Features
-
1,500 PSI at 2.0 GPM — — steady cold-water output tuned for routine commercial washdowns rather than one-off blasting.
-
2.0 HP Baldor motor on 120V — — runs off a standard single-phase 20-amp circuit, so it goes where the work is without special wiring.
-
Centurion CTE1 triplex pump — — a die-cast body, forged brass manifold, and ceramic-coated plungers outlast the throwaway axial pumps on consumer units.
-
Fume-free electric operation — — no exhaust means you can run it indoors in wash bays, garages, and processing rooms a gas washer can’t touch.
-
Built-in unloader with thermal release valve — — regulates flow in a compact package and protects the pump when the trigger is closed.
-
Powder-coated steel wall-mount frame with hose reel — — holds up to 100 ft of 3/8 in hose and keeps the machine off the floor and organized.
-
50 ft x 3/8 in steel-braided hose and four nozzles (0°, 15°, 40°, soap) — — ready to use out of the box, from pinpoint stripping to detergent rinse.
-
Included auto start/stop switch — — the motor cycles with the trigger to save power and cut heat and wear between passes.
Power and Water Requirements
✔︎ 120V standard shop outlet on a dedicated 20-amp circuit — the motor draws 17 amps, so don’t share the circuit.
✔︎ Plugs into a NEMA 5-20P outlet — confirm you have the matching receptacle or have an electrician add one.
✔︎ A steady cold-water feed of at least 2.0 GPM from a standard garden hose and spigot; starving the pump shortens its life.
✔︎ Runs cold water only; draw detergent through the adjustable injector for wash-and-rinse work.
✔︎ Plan wall space and mount into solid structure — the unit weighs 197 lbs and is built to stay put.
✔︎ Ships freight (203 lbs boxed) — line up help or a liftgate to unload.
Product Documents
Full Specifications
| Specification |
Details |
| Pressure |
1,500 PSI |
| Flow Rate |
2.0 GPM |
| Motor |
Baldor, 2.0 HP |
| Voltage |
120V |
| Phase |
Single Phase |
| Amperage |
17 Amps |
| Pump |
Centurion CTE1 Triplex |
| Unloader |
Built-In with Thermal Release Valve |
| Frame |
Powder-Coated Steel Wall Mount (111 Small Frame) |
| Hose |
50 ft x 3/8 in Steel Braided |
| Nozzles |
0°, 15°, 40° and Soaper |
| Plug Type |
NEMA 5-20P |
| Pump RPM |
3,450 |
| Soap System |
Adjustable Injector |
| Hose Reel |
Holds up to 100 ft x 3/8 in |
| Gun Wand |
36 in Insulated |
| Power Cord Length |
29.5 ft |
| Shipping Weight |
203 lbs |
| Included |
Auto Start/Stop Switch |
| Unit Dimensions |
29 × 20 × 30 in |
| Unit Weight |
197 lbs |
| Certifications |
CSA Certified |
| Warranty |
Motor 2 Years / Pump 5 Years |