A 5.0 HP Wall-Mount Electric Washer Built to Run Water Up to 185°F
The BE Power Equipment X-2050FW1GENHT is a heavy-duty wall-mount commercial electric pressure washer for permanent, high-use wash stations. A 5.0 HP Baldor motor on 230V power drives a high-temperature General EPHT1812 triplex pump for 2,000 PSI at 3.8 GPM — and its special plating and seals let this electric pressure washer accept an externally heated supply up to 185°F to cut grease and baked-on soils faster.
It’s made for demanding fixed installations: busy fleet and equipment bays, food and agricultural plants, and industrial wash stations that need real hot-water-capable output without a gas engine. With an onboard hose reel, trigger-controlled auto start/stop, and a rugged wall-mount frame, this commercial electric pressure washer becomes a permanent, always-ready cleaning station.
Key Features
-
2,000 PSI at 3.8 GPM — higher flow for faster rinse-down and bigger jobs on a fixed wash station.
-
Accepts hot water up to 185°F — special high-temperature pump plating and seals let it run an externally heated supply to strip grease faster.
-
5.0 HP Baldor motor on 230V single-phase power — commercial-grade power for higher flow and longer daily run times.
-
General EPHT1812 triplex pump — die-cast body, forged brass manifold, and solid ceramic plungers built for rigorous temperatures.
-
Auto start/stop switch — the motor cycles with the trigger to save energy and cut wear during downtime.
-
Wall-mount steel frame with onboard hose reel — holds up to 100 ft of 3/8 in hose and keeps the station organized and permanent.
-
Four quick-connect nozzles (0°, 15°, 40°, soap) — switch spray angles instantly from concentrated to wide rinse to soap.
-
CSA certified with adjustable soap injector — meets commercial code and meters detergent for wash-and-rinse work.
Power, Water, and Placement
✔︎ Requires a 230V single-phase circuit — the Baldor motor draws 23 A, so size the breaker and wiring accordingly.
✔︎ Mounts to a solid wall — anchor for roughly 245 lbs of unit plus a loaded hose reel.
✔︎ Feed it at least 3.8 GPM of water; it accepts an externally heated supply up to 85°C / 185°F.
✔︎ Cold or externally heated water only — this unit has no built-in burner or heater of its own.
✔︎ Draw detergent through the adjustable injector for wash-and-rinse cycles.
✔︎ Ships freight on a pallet at 253 lbs boxed — plan for a liftgate and extra hands to unload.
Product Documents
Full Specifications
| Specification |
Details |
| Pressure |
2,000 PSI |
| Flow Rate |
3.8 GPM |
| Motor |
Baldor |
| Voltage |
230V |
| Phase |
Single Phase |
| Amperage |
23 A |
| Pump |
General EPHT1812 Triplex |
| Unloader |
External with 36 in Bypass Hose |
| Frame |
Powder-Coated Steel |
| Hose |
50 ft × 3/8 in Steel Braided |
| Nozzles |
0°, 15°, 40° and Soap |
| Max Inlet Water Temperature |
185°F (85°C) |
| Motor Horsepower |
5.0 HP |
| Pump Oil |
30W Non-Detergent |
| Soap System |
Adjustable Injector |
| Trigger Control |
Auto Start/Stop Switch |
| Mounting |
Wall Mount |
| Hose Reel |
Holds up to 100 ft × 3/8 in |
| Gun and Wand |
36 in Insulated |
| Fittings |
Quick Connect |
| Boxed Dimensions |
40 × 22 × 32 in |
| Shipping Weight |
253 lbs |
| Unit Weight |
245 lbs |
| Certifications |
CSA |
| Warranty |
2-Year Motor |