A Wall-Mount 1,500 PSI Electric Washer That Takes Water Up to 185°F
The BE Power Equipment X-1520FW1GENH is a wall-mount commercial electric pressure washer engineered for permanent wash stations. A 2.0 HP Baldor motor on standard 120V power drives a high-temperature General HTC150FE345 triplex pump for 1,500 PSI at 2.0 GPM — and its special plating and seals let this electric pressure washer accept an externally heated water supply up to 185°F to cut grease and grime faster.
It’s built to live on the wall in a bay or plant: fixed wash stations, food and agricultural facilities, and kennels or shops that want hot-water-capable cleaning without a gas engine. An onboard hose reel, auto start/stop trigger control, and a simple 120V plug make this commercial electric pressure washer a clean, permanent fixture that’s ready the moment the trigger is pulled.
Key Features
-
1,500 PSI at 2.0 GPM — steady commercial cleaning output tuned for detailed and repeat wash-station work.
-
Accepts hot water up to 185°F — special high-temperature pump plating and seals let it run an externally heated supply to cut grease faster.
-
2.0 HP Baldor motor on 120V power — plugs into a standard NEMA 5-20P outlet — no special electrical service required.
-
General HTC150FE345 triplex pump — die-cast body, forged brass manifold, and solid ceramic plungers built for rigorous temperatures.
-
Auto start/stop switch — the motor cycles on and off with the trigger to save energy and reduce wear during downtime.
-
Wall-mount steel frame with onboard hose reel — holds up to 100 ft of 3/8 in hose and keeps the whole station tidy and permanent.
-
Four quick-connect nozzles (0°, 15°, 40°, soap) — switch spray angles instantly from concentrated to wide rinse to soap.
-
CSA certified with adjustable soap injector — meets commercial code and meters detergent for wash-and-rinse work.
Power, Water, and Mounting
✔︎ Plugs into a standard 120V NEMA 5-20P outlet — the Baldor motor draws 17 A, so give it a dedicated 20 A circuit.
✔︎ Mounts to a solid wall — plan for sturdy anchoring, since the unit and full hose reel weigh about 212 lbs.
✔︎ Feed it at least 2.0 GPM of water; it will accept an externally heated supply up to 85°C / 185°F for hot-water cleaning.
✔︎ Cold or externally heated water only — this unit has no built-in burner or heater of its own.
✔︎ Draw detergent through the adjustable injector for wash-and-rinse cycles.
✔︎ Ships freight on a pallet at 220 lbs boxed — plan for a liftgate or extra hands to unload.
Product Documents
Full Specifications
| Specification |
Details |
| Pressure |
1,500 PSI |
| Flow Rate |
2.0 GPM |
| Motor |
Baldor |
| Voltage |
120V |
| Amperage |
17 A |
| Pump |
General HTC150FE345 Triplex |
| Unloader |
External with 36 in Bypass Hose |
| Frame |
Powder-Coated Steel |
| Hose |
50 ft × 3/8 in Steel Braided |
| Nozzles |
0°, 15°, 40° and Soap |
| Max Inlet Water Temperature |
185°F (85°C) |
| Motor Horsepower |
2.0 HP |
| Plug Type |
NEMA 5-20P |
| Pump Oil |
30W Non-Detergent |
| Soap System |
Adjustable Injector |
| Trigger Control |
Auto Start/Stop Switch |
| Mounting |
Wall Mount |
| Hose Reel |
Holds up to 100 ft × 3/8 in |
| Gun and Wand |
36 in Insulated |
| Fittings |
Quick Connect |
| Boxed Dimensions |
40 × 22 × 32 in |
| Shipping Weight |
220 lbs |
| Unit Weight |
212 lbs |
| Certifications |
CSA |
| Warranty |
2-Year Motor, 5-Year Pump |