A 3-Inch Trash Pump That Moves 370 Gallons a Minute — Mud, Grit, and All
The BE Power Equipment TP-3013HM is a commercial trash pump built to move dirty water fast, pushing up to 370 GPM through a full 3-inch inlet and outlet. A reinforced aluminum pump body and cast iron impeller let it pass solids up to 1 inch in diameter — the leaves, gravel, mud, and grit that would jam a clean-water transfer pump — while a commercial Honda GX390 engine gives it the torque to run all day, every day.
It’s the semi trash pump crews reach for when a site floods or a pit needs to come down fast: contractors dewatering excavations and trenches, farms and municipalities clearing ponds, ditches, and storm runoff, and rental fleets that need a pump tough enough to survive whatever gets sucked into it. Quick-access flanges pop open for fast cleanout, and a steel roll cage with ergonomic hand holds protects the machine and makes it easy to wrangle into position.
Key Features
-
370 GPM through a 3-inch inlet and outlet — — high-volume flow that empties a flooded pit, trench, or basement in a hurry.
-
Handles solids up to 1 inch — — passes leaves, gravel, mud, and grit that would clog a clean-water transfer pump.
-
Reinforced aluminum pump body with cast iron impeller — — built to survive the abrasive debris that comes with dirty-water pumping.
-
Commercial Honda GX390 (389cc) engine — — the benchmark work-all-day engine, prized for easy starts and reliable torque under load.
-
26 ft suction lift and 98 ft total lift — — pulls water from deep below and pushes it well up and away from the work area.
-
Quick-access flanges — — open the pump body fast to clear a jam or rinse it out between jobs.
-
Steel roll cage with ergonomic hand holds — — protects the pump and engine and gives you a solid grip to move 138 lbs into position.
-
3-year engine and 2-year pump warranty — — commercial-grade coverage on both the Honda power and the wet end.
Sizing It to Your Job
✔︎ This is a 3-inch pump — match it to 3-inch suction and discharge hose for the rated 370 GPM flow; smaller hose will choke the output.
✔︎ Rated to pass solids up to 1 inch — ideal for muddy, gritty, debris-laden water, not for clean potable transfer.
✔︎ Plan around 26 ft of suction lift and up to 98 ft of total lift — keep the pump as close to the water level as you can for best performance.
✔︎ Runs on fresh 86-octane gasoline (up to 10% ethanol) with SAE 10W30 in the Honda GX390 — no electrical hookup needed, so it goes wherever the water is.
✔︎ Ships at 138 lbs unit weight (144 lbs boxed) — plan for a liftgate or a second set of hands to unload.
Product Documents
Full Specifications
| Specification |
Details |
| Flow Rate |
370 GPM |
| Engine |
Honda GX390 |
| Engine Type |
Air-Cooled, 4-Stroke OHV |
| Fuel Type |
Gasoline (86 octane, up to 10% ethanol) |
| Frame |
Steel Roll Cage |
| Suction Lift |
26 ft |
| Inlet/Outlet Size |
3 in |
| Maximum Pressure |
37 PSI |
| Maximum Solids Handling |
1 in |
| Discharge Lift |
72 ft |
| Total Lift |
98 ft |
| Pump Body |
Reinforced Aluminum |
| Impeller |
Cast Iron |
| Displacement |
389 cc |
| Oil Type |
SAE 10W30 |
| Boxed Dimensions |
26 x 18 x 22 in |
| Shipping Weight |
144 lbs |
| Unit Weight |
138 lbs |
| Warranty |
3-Year Engine, 2-Year Pump |