The Fume-Free 2,000 PSI Electric Pressure Washer That Cleans Indoors Where Gas Units Can’t Go
The BE Power Equipment B205EA is a commercial electric pressure washer built for the wash bays, plants, and enclosed spaces where engine exhaust simply isn’t an option. A 5.0 HP Baldor motor drives a Centurion CTE2S triplex pump to put a steady 2,000 PSI at 3.5 GPM on target — real cold-water cleaning power that runs quiet, produces zero fumes, and never fills a room with carbon monoxide the way a gas unit does.
This is the kind of industrial pressure washer that earns its keep indoors: food and beverage plants hosing down floors and equipment, fleet and truck bays cutting grease off rigs, warehouses and ag buildings handling the daily grime that never lets up. Because it runs on wall power instead of a tank of gas, this commercial electric pressure washer starts instantly, idles silently between jobs, and keeps the air breathable while it works.
Key Features
-
5.0 HP Baldor motor on 240V single-phase power — energy-efficient, reliable, and built for the duty cycle of daily commercial use.
-
Centurion CTE2S triplex pump — die-cast body, forged brass manifold, ceramic-coated plungers, and a thermal release valve mean it runs cooler and lasts years longer than throwaway axial pumps.
-
External unloader with 36 in bypass hose — set it to dump bypass water to the ground to keep the pump running cool through long sessions.
-
Zero exhaust, zero fumes — the electric motor makes it safe to run inside wash bays, basements, and enclosed rooms where a gas engine can’t operate.
-
50 ft × 3/8 in steel-braided hose — reach across a bay or around equipment without dragging the whole machine behind you.
-
Four quick-connect nozzles (0°, 15°, 40°, and soap) — dial from pinpoint stripping to a wide rinse to detergent draw in seconds.
-
Powder-coated steel frame with 12 in flat-free tires — onboard accessory storage and never-flat wheels roll it over rough shop floors and lots.
-
CSA certified with an adjustable detergent injector — meets code for commercial use and meters soap for wash-and-rinse cycles right out of the box.
Power and Water Requirements
✔︎ Requires a 240V single-phase circuit — the motor draws 23 A, so size the breaker and wiring to match.
✔︎ Ships without a power cord, plug, or switch by design — it must be hardwired by a licensed electrician before first use.
✔︎ Feed it a steady water supply of at least 3.5 GPM from a standard garden hose and spigot; starving the pump for water is the fastest way to shorten its life.
✔︎ Runs completely fume-free — ideal for indoor and enclosed-area cleaning where a gas washer is off the table.
✔︎ Cold water only on this model; draw detergent through the adjustable injector for wash-and-rinse work.
✔︎ Ships freight on a pallet at 132 lbs boxed — line up a liftgate or a second set of hands to unload.
Product Documents
Full Specifications
| Specification |
Details |
| Pressure |
2,000 PSI |
| Flow Rate |
3.5 GPM |
| Motor |
Baldor |
| Voltage |
240V |
| Phase |
Single Phase |
| Amperage |
23 A |
| Pump |
Centurion CTE2S |
| Pump Type |
Triplex |
| Unloader |
External with 36 in Bypass Hose |
| Frame |
Powder-Coated Steel |
| Hose |
50 ft × 3/8 in Steel Braided |
| Nozzles |
0°, 15°, 40°, and Soap |
| Wheels |
12 in Flat-Free |
| Motor Horsepower |
5.0 HP |
| Pump Oil |
30W Non-Detergent |
| Soap System |
Adjustable Injector |
| Gun and Wand |
36 in Insulated |
| Fittings |
Quick Connect |
| Power Cord |
Not Included — requires hardwiring by an electrician |
| Boxed Dimensions |
32 × 25 × 27 in |
| Shipping Weight |
132 lbs |
| Unit Weight |
126 lbs |
| Certifications |
CSA |
| Warranty |
2-Year Motor |