2,700 PSI of Fume-Free Electric Cleaning Power — Built to Run Inside the Bay
The BE Power Equipment B2775EA is a commercial electric pressure washer that steps up to 2,700 PSI at 3.5 GPM without ever burning a drop of fuel. A 7.5 HP Baldor motor turns a Centurion CTE2S triplex pump to deliver tougher cold-water stripping than the base electric models, while the electric drive keeps the workspace free of exhaust and engine noise.
It’s the industrial pressure washer for crews that clean where a gas engine can’t breathe: enclosed wash bays, food and beverage facilities, fleet garages, and manufacturing floors. As a commercial electric pressure washer it fires up on wall power the instant you pull the trigger, so operators lose no time priming or pull-starting between jobs, and the air stays clear no matter how long the shift runs.
Key Features
-
7.5 HP Baldor motor on 240V single-phase power — extra motor muscle drives the jump to 2,700 PSI for faster stripping on stubborn grime.
-
Centurion CTE2S triplex pump — die-cast body, forged brass manifold, ceramic-coated plungers, and a thermal release valve for cool, long-life operation.
-
External unloader with 36 in bypass hose — dump-to-ground bypass keeps the pump cool during extended cleaning sessions.
-
No exhaust and no engine noise — the electric motor runs safely indoors where gas washers are prohibited and keeps decibels down for the whole crew.
-
50 ft × 3/8 in steel-braided hose — cover a full bay or wrap around equipment without repositioning the machine.
-
Four quick-connect nozzles (0°, 15°, 40°, and soap) — swap spray patterns in seconds to match the surface and the mess.
-
Powder-coated steel frame with 12 in flat-free tires — accessory storage and never-flat wheels handle rough shop floors and outdoor lots.
-
CSA certified with an adjustable detergent injector — code-compliant for commercial duty and ready to meter soap out of the box.
Power and Water Requirements
✔︎ Requires a 240V single-phase circuit — the 7.5 HP motor draws 32 A, so verify your breaker and wiring can carry the load.
✔︎ Ships without a power cord, plug, or switch — plan to have it hardwired by a licensed electrician before first use.
✔︎ Supply a steady water feed of at least 3.5 GPM from a standard hose and spigot to keep the pump fed.
✔︎ Runs fume-free, making it a fit for indoor and enclosed wash bays where exhaust is a dealbreaker.
✔︎ Cold water only; draw detergent through the adjustable injector for wash-and-rinse cycles.
✔︎ Ships freight on a pallet at 152 lbs boxed — arrange a liftgate or a second person to unload.
Product Documents
Full Specifications
| Specification |
Details |
| Pressure |
2,700 PSI |
| Flow Rate |
3.5 GPM |
| Motor |
Baldor |
| Voltage |
240V |
| Phase |
Single Phase |
| Amperage |
32 A |
| Pump |
Centurion CTE2S |
| Pump Type |
Triplex |
| Unloader |
External with 36 in Bypass Hose |
| Frame |
Powder-Coated Steel |
| Hose |
50 ft × 3/8 in Steel Braided |
| Nozzles |
0°, 15°, 40°, and Soap |
| Wheels |
12 in Flat-Free |
| Motor Horsepower |
7.5 HP |
| Pump Oil |
30W Non-Detergent |
| Soap System |
Adjustable Injector |
| Gun and Wand |
36 in Insulated |
| Fittings |
Quick Connect |
| Power Cord |
Not Included — requires hardwiring by an electrician |
| Boxed Dimensions |
32 × 25 × 27 in |
| Shipping Weight |
152 lbs |
| Unit Weight |
146 lbs |
| Certifications |
CSA |
| Warranty |
2-Year Motor |